The concept of hold hoop

A hoop is a component that holds or hugs another material. It belongs to a fastener. The hoop device is composed of a hoop plate, a wing plate, a tie bar, a bolt, and an inner pad.

 

The type of hold hoop

There are many kinds of hoop, cable hoop, telephone pole hoop, pull wire hoop, and hanging wire hoop, stainless steel hoop are all commonly used.

An embedded hoop is formed by the left and right halves of the hoop being joined together. The left and right halves of the hoop are semi-circular, and the ends of the semi-circle are bent outward to form one each. The mounting ear is characterized in that the mounting ear at one end of the left half of the hoop is provided with a slot. Correspondingly, a pin is provided on the mounting ear of the corresponding end of the right half of the hoop, and one end of the right half of the hoop is provided. The pin on the mounting ear fits into the recess on the mounting ear on the left half of the hoop.

 

Classification and use of hoop

There are many kinds of hoop, cable hoop, telephone pole hoop, pull wire hoop, hanging wire hoop, stainless steel hoop are all commonly used. The most common are U-shaped hoop, butt hoop

The hoop products are used as follows:

Pull wire hoop: used for pulling the wire on the cement pole;

Hanging wire hoop: used with steel strand plywood hanging wire cable stranded wire on the cement pole without reserved hole;

Fork beam hoop: fasten the beam device;

Loading U-shaped hoop: install the line on the cement pole without reserved holes;

Type I distribution box hoop: Install various types of 10 to 30 pairs of outdoor circular distribution boxes on cement poles and wooden poles without reserved holes;

T-type distribution box hoop: Install various types of 10-20 pairs, 30-50 pairs of outdoor circular distribution boxes on cement poles and wooden poles without reserved holes;

Junction box hoop: Install 5 to 50 pairs of flat junction boxes of various types on cement poles and wooden poles without reserved holes;

Upper pole hoop: used by the lineman to up and down the cement pole;

Support feet hoop: for installing support feet on the cement pole without reserved holes;

Chuck hoop: In order to increase the anti-tilt capacity of the cement rod in the soft soil, when the chuck is installed on the ground, the chuck is fastened to the pole.

After this intorduction of hold hoop, we will recommend about quality Amercian hose clamps manufacturer through our site, and check out which hose clamp belongs to your demand.